Reach Forklifts
In the majority of distribution facilities or warehouse settings, overall space is typically limited. If you could get a machine to utilize in smaller aisles and spaces, the more storage space a company will be able manage. Thus, particular machine has been intended to be used in extremely narrow aisles to be able to maximize efficiency and space.
Reach Trucks
The specialized reach lift truck has a mast that extends away from the body of the forklift. It normally is attached with a scissor mechanism. When the scissor is compacted or drawn in, the forklift becomes much narrower compared to the regular forklift.
Operator Position
Reach trucks are designed so the driver can stand while in operation of the machine. This is a contrast to the regular forklift where the driver is usually sitting. The standing operation area lessens the amount of room needed for the operator compartment, allowing the equipment to accomplish an even smaller profile overall.
Space Saving
With a reach truck, aisles could be made as narrow as 7 feet. Most standard forklifts need a minimum aisle space of around 11 feet; hence, utilizing a reach truck provides roughly a savings of 5 feet per aisle. When the warehouse is leased by the square foot basis, this is a considerable amount of space.
Unique Controls
A reach truck is usually steered utilizing a rotating lever which is located on a platform beside the driver. There is another lever utilized to control the mast and for extending the mast and also to control forward and reverse. These controls are quite different than typical forklift controls.
Load Capacity
Usually, the load capacity for a reach truck is less than that of a standard forklift, depending on the model. This is largely due to the narrow design of the equipment, which could result in a very high center of gravity. When the load is raised and the mast is fully extended, this is particularly true.