It is really important to use extra caution when using a rough terrain scissor lift. Operators must be fully aware of the surrounding environment. Extended booms on the machinery act as levers from the center of the drive unit. Like for example, a 6 inch bump could result in a 3 foot bounce when the operator is at the driver controls. Consider all other traffic in the vicinity, since they may not know that you are moving. Plan your assent carefully. Park the boom lift on a flat surface which has no mud or water. These areas conceal deep potholes which could be possibly cause the occupants to fall if the tires fell into the holes. If provided, use all of the outriggers, completely extended. Be certain to only use wooden chalk blocks that are approved.
A lot of lifts operate from a metal platform on the end of the boom. The extended booms act as levers from the drive unit's center. A 6-inch bump could cause a 3-foot bounce while you are at the driver controls. Consider all other traffic. They may not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas could cover deep potholes wherein the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, to the full extension position. Place only approved wooden chalk blocks beneath the outrigger pads in order to prevent the unit from moving.
Overhead power lines are a serious hazard for lift operators no matter what lift is being used. For example, if the driver of the platform is not being aware, or if the platform is being controlled by personnel on the ground which is not able to correctly access nearness to wiring and hence, either the platform itself or the worker could be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless properly insulated.