Nearly all of the time, businesses will spend lots of money to buy their lift trucks. It is essential, therefore to take good care of your equipment to protect your investment into the long run. It is really a great idea to know the procedures which are carried out during the maintenance and care of this piece of equipment.
By starting up the forklift and listening carefully how it works is among the best ways to tell how good the engine is working. For instance, if there are any knocks or misses, the machinery is faulty and this must raise some concerns. Also listen carefully for any squealing sounds that come from the belts because these sounds will provide you with a wealth of information.
When doing maintenance, some of the main parts you would need to pay attention to include the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty components or burnt out light bulbs need to be replaced as soon as they are noticed. It is also imperative to check the wiring.
The battery compartment terminals must be cleaned after the above parts have been checked thoroughly. If the terminals are not clean, be sure to clean them properly. Each and every battery cell needs to be inspected in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter need to be replaced on a regular basis. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from underneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the problem accordingly. Next, inspect each and every other component of the equipment including the wheels. If any kind of fault or concern is detected, be sure to deal with it immediately so as to make sure the machine is running at its safest and optimum levels.